Google+

Consider All the Costs of Compressed Air

2

February 19, 2014 by kaeserusa

Consider_All_the_CostsThe purchase price of a compressor is an important consideration when comparing new equipment options, but it’s only one of several cost components that affect the overall cost of owning and operating an air system. Low price options often have higher life cycle costs.

Installation, energy, maintenance and repair, as well as lost time and materials each greatly impact the overall bottom line of your compressed air system. Be sure to consider each of these other cost drivers as you are making a purchasing decision. In many cases, the benefits in one area outweigh the costs in another and vice versa.

Installation: The equipment you select directly impacts installation costs. It’s common for buyers to build separate rooms or structures to isolate noisy, vibrating compressors from employees and customers for the sake of safety and comfort. When selecting equipment, it is always a good idea to review the sound pressure level, general environmental requirements, such as air intake and discharge, and general electrical requirements of the equipment. Choices in piping also impact installation time and labor.

Energy: Compressors are by nature energy intensive. Your energy costs depend on the compressor size (hp), how much you run it, and your local utility rates, but even small compressors are often the largest energy user in a shop. Compressor efficiency varies widely between types and brands of compressors, so there are opportunities for significant savings. One major source for savings that is often overlooked is recovering the heat generated by the compressor—even for small compressors. Since 100% of the electrical energy used by the compressor is converted into heat and 96% of this energy is available for recovery, the savings potential with heat recovery is huge.

Maintenance and repair: Be sure you understand the preventive maintenance as well as periodic major maintenance requirements of equipment you are comparing. Also, system sizing and installation location impact the duty cycle and heat load on the compressor. These factors heavily influence longevity.

Lost time and materials: Often overlooked (because they are harder to calculate) are the costs of lost productivity due to downtime as well as wasted time/materials and reduced tool life due to poor air quality or fluctuating pressure. These may be among the highest costs associated with compressed air, and they can quickly erase the savings gained during the equipment purchase.

For more information and energy saving tips, visit Kaeser’s sustainability page.

2 thoughts on “Consider All the Costs of Compressed Air

  1. Russell Morine says:

    I am curious what happens when a Model SFC 45S-125 air compressor reaches minimum speed and output? Does the air compressor unload or does it automatically stop? Please advise. Thanks, Russell

    • kaeserusa says:

      On all of our SFC units with Sigma Control 2, there’s a choice of control modes:
      The SFC unit can either unload and remain unloaded for a limited time (waiting for a possible change in demand) and then stop, or quickly unload (seconds) and stop.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Enter your email address to follow this blog and receive notifications of new posts by email.

Have a Question?

%d bloggers like this: